Wall Saw: WS - 301

With an output of 11kW the fully-electric wall saw WS-301 is the most powerful saw of its class.

The saw captivates by its extremely compact design. Blade drive motors and additional motors are protected by being integrated in one housing

The large radius of the swivel arm enables direct operation of a 800mm saw blade without precut.

The complete electric/electronic has been designed and certified according to the EMV-regulations (electromagnetic compatibility). This makes the saw applicable without any problems also in sensitive areas such as hospitals or airports.

the saw is equipped with a buffer for a final stop.

The water supply to the saw blade can be interrupted by means of a bypass function. Thus the WS-301 can also be operated in dry cutting mode.

The large carrying handles enables comfortable transport on the job site.

The contol box of the SW-301 serves for taking the nesessary lectronics as well as a transport box for the cutting head.

The rubber-bedded electronic is placed int he upper part, protected against shocks. It has been designed for a permanent output of 15kW and a peak capacity of 23kW

The feed drive is placed behind the fron cover. The lower part of this compartment can also be used for the comfortable transport of the WS-310

Also on uneven terrain the large wheels enalbe it to be easily moved forward.

The electronics can also be utilised for the control of the CEDIMA Automatic Wire Saws CSA-500 E and CSA-1001 E.

The blade guard, 2 pieces, for the WS-301 is made of light aluminium. The "drive-along" blade guard can be opened for cutting corners.

A flush cutting blade guard is available as well. The flange for flush cutting of the WS-400 can also be utilised for the WS-301.

The guide rails of the WS-301 are made of torsion-resistant aluminium profiles. Thus a very low weight could be obtained.

The rail blocks are manufactured of a high-solid magnesium alloy. They are equipped with a dove-tail receptacle and can be indefinitely displaced on the rail.

The rails are connected by means of an aluminium-made connecting device.

The rail system of the WS-400 can be utilised without any modifications. The rails are available in 700, 1400 and 2100 mm.

*S1 - permanent output / S6 - output at discontinued operation